5 Best Dovetail Jigs
Best dovetail jigs
A well-made dovetail joint invariably signifies a quality piece of furniture. Historically, these joints were cut by hand with just a saw and a chisel, and so it was a way for fine woodworkers to display their skill.
Today, there are a variety of dovetail jigs available which, when combined with a router, make the job much faster and easier. With a little care, the home woodworker can replicate craftsmanship that would otherwise take days to produce. If you’re searching for the right dovetail jig for your workshop, we can help.
We’ve been looking at what is available so we can help you choose the best dovetail jig for your needs. Our recommendations represent a broad range of performance and price points. We discuss the mechanisms in more detail in this buying guide, and we offer some useful tips and answer some common questions about dovetails.
Key considerations
Finger vs. dovetail joints
Finger joints: These joints, also known as box joints or comb joints, have straight sides and are much easier to cut than dovetail joints. However, because the two pieces slide together easily, they can also come apart quite easily. To keep them together you need either nails or glue.
Dovetail joints: These joints have angled sides. There’s only one way to put them together, and, once assembled, they will only come apart in one direction. For example, if you use a dovetail to attach a drawer front, it’s absolutely secure. No amount of pulling on it will ever make it come undone. Provided the joint is well cut, there’s no need for glue or nails. Done properly, a dovetail is not only a thing of beauty but it’s also incredibly strong. Dovetail furniture made hundreds of years ago is still intact today.
Types of dovetail jig
There are two parts to a dovetail, called “tails” and “pins,” which interlock to form the joint. Each is a similar but different shape (like a dove’s tail). A jig needs to enable you to cut both.
Two-step: The cheapest dovetail jig is a simple toothed guide (often called a comb because that’s what it resembles). Each side of the comb is a slightly different shape. The first piece of wood that you want to join is held in a vise, the jig is then clamped to it. An angled router cutter is used to form the tails or pins. The other piece of wood then has to be held in the same way, with the jig turned around and clamped again to create the second part of the joint.
The advantage of this type of dovetail jig is there’s no limit to the width of board you can join. You just keep repositioning the jig. The disadvantage is that that there are several steps, and things can go wrong at each if you’re not careful. Secure clamping and accurate positioning are absolutely critical. Any error in alignment means the joint won’t work. This type of jig will usually only allow one size of dovetail, so if you want others, you’ll need to buy a different jig.
One-step: To overcome these problems, a more complex type of jig was developed. Instead of clamping the jig to the board, the boards are clamped to a stationary jig. This clamps both boards at the same time – one vertically, one horizontally. Once clamped and aligned (which still requires care), the tails and pins of the dovetail are cut simultaneously. Different templates (combs) allow different-size dovetails and different spacing. Most jigs allow you to cut “through” and “half-blind” dovetails, the two most common types. Some allow you to cut more decorative types and box joints as well.
This type of dovetail jig is most often recommended for novices. It’s much faster, and though it’s possible to make errors, they are much less likely. The only drawback is that the size of the board is limited by the width of the device, and hence different-size models are offered. Most are 12-inch (which is more than enough for the majority of woodworkers), but a few 18-inch versions exist.
A more advanced version of this kind of clamping jig has individual “fingers” rather than a comb. Rather than always being evenly spaced, as on fixed jigs, these can be set wherever you like across the board. This gives a virtually limitless potential for highly decorative dovetails.
Dovetail jig features
Templates
The majority of templates are made of aluminum. The cheaper toothed guides (combs) are sometimes made of phenolic resin, which is hard and very strong. It’s important to treat both with care. Any damage will mean the router cutter can’t follow it smoothly and won’t be able to create the joint properly. Templates are difficult, if not impossible, to repair.
Clamps
With the simple comb-type jig, you’ll need to provide your own clamps, so you want something that is easy to use one-handed. Those that clamp the wood for you sometimes have an abrasive on the gripping surface to help hold the board securely. They should have large, easy-to-operate levers that clamp in one movement.
Board thickness
Check the thickness of boards the jig can accommodate. Usually, this is around 1/4 inch minimum and 1 inch – or perhaps a little more – as a maximum.
Body
The main body of clamping dovetail jigs is usually steel, either painted or powder coated, with the latter being a little more durable. There should be provision to either screw or clamp the jig to your workbench for complete stability.
Router cutter
We would expect any quality dovetail jig to include at least one router cutter. Some offer several.
Dovetail jig prices
Inexpensive
We did find a couple of dovetail jigs for around $50, and they look similar to some of our favorites, but our concerns about quality and accuracy were echoed by many owners. If it’s something you’re not going to use often, some argue they’re okay. We think that if you’re going to the trouble of cutting dovetails rather than using dowels or pocket holes, you want the results to be recognized as special. It’s fair to say you can’t produce a high-quality joint with mediocre tooling.
Mid-range
We would look at spending $150 to $200, depending on the number of templates you want (you can always add more later). There are a number of good machines in this bracket.
Expensive
If you want the ultimate in versatility, with the ability to cut unique offset, angled, or inlaid dovetails, you’ll pay closer to $300, and some go as high as $600.
Tips
- Always wear goggles or safety glasses and a dust mask. A router cutter spinning at 20,000 rpm is loud and can create a lot of waste. Ear protection and some form of dust extraction system are strongly recommended, too.
- Double-check that the jig is secure before you cut. Stability is vital. If your jig clamps to the material, make sure it’s really secure. The same goes for if your jig clamps to your bench, and for when the wood clamps to the jig. There’s nothing you can do with a badly cut dovetail except start again.
- Don’t rush when setting up the jig. Cutting dovetails on a router jig can be very fast, as long as you’ve spent the time and taken the care necessary when setting up the jig. Remember the old woodworker’s adage, “Measure twice, cut once.”
- Handle the templates with care. The templates, combs, or fingers of your dovetail jig are crucial for joint accuracy. Don’t be tempted to leave one out on a bench while you’re working with another. You never know what might get dropped on them. They’re almost impossible to repair.
- Check out instructions online. The instructions that come with dovetail jigs aren’t always as clear as they could be. Fortunately, there are lots of online videos that can help.
FAQ
Q. Does it matter which router I use with my dovetail jig?
A. You have quite a lot of flexibility. It largely depends on the size of the dovetails you want to make because it will impact on cutter size. If the cutter has a 1/4-inch shank, it’s probably a comparatively small jig surface, so for maximum stability and accuracy, a small to medium router would be best. If it’s a 1/2-inch shank, it’s likely you’re cutting larger dovetails (on a larger jig). You will want a machine with plenty of power to cut joints of that size.
Q. What’s the difference between a “through” dovetail and a “half-blind” dovetail?
A. A through dovetail can be seen from the front and side. It’s often used in box and frame construction. A half-blind dovetail can be seen from the side, but from the front it’s invisible. All you see is a plain piece of wood. It’s most commonly used for high-quality drawer construction.
Q. Are dovetails always used for making boxes and joining boards at 90°?
A. No. With the right jig, it’s possible to make angled dovetails so you can have boxes with sloping sides. Some craftspeople also use end-to-end dovetails to make a decorative joint between two or more flat pieces, thus creating a continuous board made of different woods.